1) remove wheel
![Vehicle brake Automotive Wheel System Tread Silver Synthetic rubber]()
2) locate sensor wire (the one closer to you)
![Silver Synthetic rubber Electrical cable Vehicle brake Wire]()
3) remove two torx bolts to remove plastic cover
![Iron Silver Carbon fibers]()
![Vehicle brake Synthetic rubber]()
4) Lift speed sensor out
![Wire Household hardware Fastener]()
![Household hardware Fastener]()
5) Unplug dual speed sensor/brake pad sensor plug (push retainer clip down in top center to expose end of the clip, then pry up end of the clip with a small flathead)
![Synthetic rubber Tread Nut Mechanic Auto mechanic]()
6) uncouple the two plugs (I forgot to get a picture of this, but the tabs connecting the two were pretty easy to gently push back with a flat head)
![Automotive Fuel System Nut Wire]()
7) Install the new speed sensor
![Carbon fibers Synthetic rubber]()
2) locate sensor wire (the one closer to you)
3) remove two torx bolts to remove plastic cover
4) Lift speed sensor out
5) Unplug dual speed sensor/brake pad sensor plug (push retainer clip down in top center to expose end of the clip, then pry up end of the clip with a small flathead)
6) uncouple the two plugs (I forgot to get a picture of this, but the tabs connecting the two were pretty easy to gently push back with a flat head)
7) Install the new speed sensor
